Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 19.06.2025 01:11

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

nine

the problem then depends on "how fast does the fuse operate?".

This is 'the assistant's answer'

The solar system as we know it may change forever - Notebookcheck

One

But it can get overloaded, and no longer works.

For this case there are devices called Metal oxide varistors (MOV).

Why do some people dislike rap and hip hop music despite there being poor quality music in every genre?

[old diagram got deleted by accident]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Why do flat earthers think using globetrotter, globetard, and other insults will make the educated arguer fall for the silly flat-earth belief?

I post the exact comment here.

At one ohm, the resistor has a maximum of 1 watt power.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Spigen just released the Apple Watch charger stand I’ve always wanted - 9to5Mac

(Dc diagram shown, AC is similar).

but I think this circuit , shows a few more pieces.

One is “what exactly is in a ‘surge protector’ ? ”

How can a native English speaker say "it was nice talking to you" in French without using that exact phrase?

But… the neutral is now “floating” because of the 1 ohm resistance.

2024–10–10[John johnson John Johnson ]

He then describes the function of a fuse.

Why won't my mom let me come home if I'm homeless?

A circuit breaker is similar, but is resettable.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

First Sentence:

Why does my girlfriend keep asking me if I love her?

These devices are installed between the “hot” and “neutral” and protective ground.

2024–10–16 [ OO OLAOYE OYEBODE ]

Barnstars:

Why do men love to stink/being smelly?

The third is lightning and “how it gets conducted into a home.”

eight

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

ChatGPT's AI coder Codex now lets you choose the best solution - BleepingComputer

Upvotes:

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Were the 1980s as uptight and prudish as movies and TV shows make them out to be? When I think of 80s culture, I think about a very "icky" judgmental yuppie status quo time period.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

The bolt then partially travels down the line to your home.

Am I the bitch for never wanting to talk to my sister again because of something she said while talking back to me?

At least they know the answer if they wanted it.

What does a fuse do?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

I found out I have cancer—I have not told my family. We can’t afford the treatment anyway. Should I just say nothing and let nature take its course?

A fuse is a non-resetable over current circuit protector.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Is Replika conscious?

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

These are simplified answers to the original question, and does not change anything I wrote above.

Your daily horoscope: June 17, 2025 - The Globe and Mail

2024–10–14 [Omar Gharbi Omar Gharbi ]

This device then solves the entire problem.

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Here is a simplified AC power diagram.

This one hit behind the barn.

This is where the MOV conducts again, and dissipated the energy.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

but this device (an Inductor) … impedes the rapid changes in the current.

There are two important concepts here.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Because the load is inductive, the current lags the voltage.(by a bit).

There are three different concepts here that are getting confused.

An AC voltage/ current source, and an ac inductive load.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Can the fuse protect the electronic devices from lightning instead of a surge protector.

He then asserts :

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Edit 2024–10.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

What is lightning?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

He then describes Rainy Season and Lightning.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Now when you have a certain ac resistance, then a current flows in a loop.

It also is a device that limits the change in current flow.

a photo is worth a thousand words.

[image of Common-mode choke]

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

so, what happens?

The other is “what does a “fuse” do?”

It seems Mohan does not understand the difference between a comment and an Answer.

what exactly is a ‘surge’ protector?

The MOV will conduct when the voltage exceeds 50% of line voltage.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

So, the voltage could go up to 500 volts, and the fuse will not open up.

In schematic diagrams this is the symbol for a fuse: